CFDs are complex instruments and come with a high risk of losing money rapidly due to leverage. Trade only with money you can afford to lose.
Open FxPro Account →
Measured

Raw+ Conditions and Your Cushion to a Margin Call · FxPro Morocco

The hard numbers behind a Raw+ account, read straight from FxPro’s own MetaTrader 5 feed: contract specs, order rules and the 2,122 tradable instruments — last read 2026-08-28.

Open FxPro Account →

Min deposit $100  ·  Up to 1:200  ·  Rating 4.6/5

Every figure in the tables above belongs either to the instrument or to the server: contract size, the lot floor and ceiling, the step between sizes, the stops level, the execution readings. None of them changes when you change your leverage and none of them differs between two clients. Leverage is the exception - it is attached to your account, and it is the only line here you can move. What it moves is the reservation behind a ticket: the same lot ties up 3.33% of its notional at 1:30 and 0.5% at 1:200. The margin call and stop-out levels stay exactly where they are, because they are ratios rather than amounts.

Contract specifications (measured)

InstrumentMin lotMax lotLot stepContract sizeTick value (USD)Digits
EUR/USD0.015000.01100,000$1.005
GBP/USD0.015000.01100,000$1.005
AUD/USD0.015000.01100,000$1.005
USD/CAD0.015000.01100,000$0.725
USD/JPY0.015000.01100,000$0.633
XAU/USD (Gold)0.015000.01100$1.002

Read live from FxPro’s MT5 Raw+ account. ‘Tick value’ is the cash change per minimum price increment, per standard lot, in USD — what one point is worth to your P&L. Last read 2026-08-28.

Order rules and account risk

  • Minimum order 0.01 lot and maximum 500 lots, in 0.01-lot steps (0.01 lot = 1,000 units on an FX major).
  • No minimum stop or limit distance (stops level 0) — you can place a stop-loss or take-profit right next to price, which suits scalping and expert advisors.
  • Margin call at 10% and stop-out at 0% margin level, as measured on the Raw+ account — confirm the live levels in your own terminal before risking capital.
  • Contract size 100,000 units per lot on FX majors and 100 oz per lot on gold.
Open FxPro Account →

Execution speed and slippage (measured)

InstrumentOrder sizeAvg fillMax fillAvg slippage (pts)At price / better / worseFails
EUR/USD0.0189 ms94 ms0.03 / 0 / 00
EUR/USD0.178 ms78 ms0.03 / 0 / 00
EUR/USD1.089 ms94 ms0.03 / 0 / 00
GBP/USD0.0183 ms94 ms0.03 / 0 / 00
GBP/USD0.183 ms93 ms0.03 / 0 / 00
GBP/USD1.088 ms94 ms1.01 / 0 / 20
XAU/USD (Gold)0.0183 ms93 ms5.6671 / 0 / 20
XAU/USD (Gold)0.1141 ms250 ms-4.3332 / 1 / 00
XAU/USD (Gold)1.083 ms94 ms9.6671 / 0 / 20

Measured by placing real market orders on the Raw+ account and timing each fill; slippage is the price difference (in points) between the click and the fill, and ‘at price / better / worse’ counts how those fills landed. Small sample (a few round-trips per size) — indicative, last read 2026-06-24.

Instrument universe (measured)

FxPro’s live MT5 server carries 2,122 tradable instruments — the real count, not a rounded marketing figure. The major tradable asset classes:

Asset classInstruments
Stocks1,855
Forex75
Futures57
ETFs46
Cryptos37
Spot22
Metals12

Counted directly on the trading server. Availability of a specific instrument can vary by account and region.

The one line on this page that is yours

Everything above is quoted for the instrument and for the server, so two clients reading it read the same thing. The leverage figure is the exception. It is attached to the account rather than to the symbol, which is why it appears nowhere in the specification tables and everywhere in what a ticket actually reserves.

The asymmetry is easy to miss because both ends meet inside the same order. You choose a volume against limits the server publishes, and the server then checks a reservation against a setting it never published here. A ticket can therefore be entirely legal against every printed limit on this page and still come back refused, for a reason that is not on the page at all.

A ratio has no leverage in it

The margin call and stop-out levels above are ratios of equity to the margin currently reserved. Nothing inside a ratio changes when the reservation does, which is why those two figures are identical for every client on the same account type no matter what leverage they hold.

The consequence runs against the usual intuition. Hold the same number of lots at a higher setting and the reservation is smaller, so the same equity sits further above the level rather than closer to it. Leverage is worth respecting for the other reason entirely: it permits a position the balance would otherwise have refused, and it is the size, not the setting, that closes the distance.

Two ceilings on one order, and only one of them is printed here

There are two limits on how large a single order can be. The published one is a maximum of 500 lots with a 0.01-lot minimum and 0.01-lot steps, and it is the same for everyone. The other is whatever your balance can reserve at your leverage, and on most accounts it binds long before the printed figure is anywhere in sight.

Keeping them apart is worth the second it takes, because they behave differently over time. The published range is a property of the account type and does not move when your balance does. The reserving ceiling moves every time equity moves, which is why the largest order an account can send is a shifting number on a day when nothing about the trading conditions changed at all.

Who each number on this page belongs to

FigureWhose it isMoves if you change leverage?
Contract size, 100,000 units per FX lotThe instrumentNo
Minimum 0.01 lots, 0.01 step, maximum 500 lotsThe account typeNo
Stops levelThe serverNo
Execution readingsThe serverNo
Margin call and stop-out levelsThe account type, expressed as ratiosNo
Margin reserved by one lotYour accountYes, inversely
Largest order your balance can reserveYour accountYes

Read the measured values for the first five rows in the tables above. The last two are not printed anywhere on this page because they are properties of an account rather than of the market.

Frequently asked questions

Does leverage change any figure in the FxPro specification tables?
No. Contract size, the lot range and step, the stops level and the execution readings all belong to the instrument or to the server. The leverage setting belongs to your account and shows up only in what a ticket reserves.
Is the margin call level different at 1:200?
No. It is a ratio of equity to the margin currently reserved, and a ratio carries no leverage term. The level printed above applies to every client on the same account type.
Why was my order refused when its size was inside the 0.01 to 500 lot range?
Because there are two ceilings and only one is printed here. The published range is the same for everyone; the second limit is what your balance can reserve at your leverage, and it is usually the one that binds first.
Does the stops level depend on my leverage?
No. It is the minimum distance from the current price at which the server will accept a stop or a pending order, and it is a server-side rule about the instrument. Account settings do not enter it.
Which number on this page changes when my balance changes?
None of them. The specification is written for the instrument and the account type. What changes with your balance is the largest order you can reserve, and that figure lives on your account rather than in the tables above.
Does higher leverage bring a margin call closer?
Not for the same number of lots - a smaller reservation puts the same equity further above the level. It brings one closer only by permitting a larger position, and it is the extra size that shortens the distance.
Where do I see the leverage that applies to my account?
In your account details and in the platform, alongside the balance and equity figures. It is not part of a symbol specification, because a specification describes the instrument and the leverage describes you.

Related FxPro pages